Call 616.656.9600

  PROUDLY MADE IN THE U.S.A.

Targets and Target Stands

Items 1 to 10 of 16 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  • 2x4 Cap - Silhouette

    These 2x4 Silhouette Caps are specially engineered and designed not to "walk" out of the stand after repeated shooting.

    Many silhouette targets will "walk" out of the holders, but ours have tabs cut into the bottom that fit snugly into our Silhouette holder.  
    Also this holder has a "trap" built into it to catch the slag instead "cutting" the 2 x 4 in half. 
    Constructed out of  heavy duty 1/4" steel with a 3/8" AR500 plate on the front that is canted at 20 degrees for bullet deflection.

    Please Note: For use with our Silhouette Targets - Targets sold seperately!

    Learn More
    $65.00

  • 2x4 Cap - Wide

    This 2 x 4 target holder is designed to fit over any standard 2 x 4. Specifically designed to hold targets from gongs to silhouettes that have a square 1/2" center hole.
    Our 2 x 4 target holders start with heavy duty 2" x 4" x 1/4" wall x 4" long steel tube - We don't skimp on the steel!!
    Next we add a high quality die spring and a strong 1/2" bolt to help absorb the impact of the bullet striking the target.
    We weld a specially designed heavy duty A36 1/4" steel cap on the top to hold the target and to prevent the tube from sliding down the 2 x 4.
    These are not the cheap holders that just have a hole drilled through the tube!

    These are professionally engineered and manufactured for years of shooting pleasure. 

    Please Note: Targets are sold separately!

    Learn More
    $45.00

  • Challenge Targets - Complete Set

    Complete Set of Three (3) Challenge Targets

    This set includes:
    1 - 2" Gong Target
    1 - 3" Gong Target
    1 - 4" Gong Target

    So you think you are a good shot? Prove it with our Challenge target set!
    Challenge your friends with this set of targets.  Anyone can hit a 10" target, but how about a 4" or even a 2" diameter teardrop shaped target?

    Laser cut out of 3/8" AR500. Laser Cutting does not affect the integrity of the AR500 Steel.

    Learn More
    $30.00

  • Gong Target - 10"

    This 10" diameter target is laser cut out of AR500 steel and has a High Visibility Orange Powder Coat baked on.
    Laser cutting does not affect the integrity of the AR500 steel.  

    This target has 2-17/32 (.530") round holes that can used as a swinging target with our Swinging Target Stand Kit or can be mounted by the square 17/32( .530") hole using one of our 2 x 4 mounts.

    Learn More
    $55.00

  • Gong Target - 12"

    This 12" diameter target is laser cut out of AR500 steel and has a High Visibility Orange Powder Coat baked on.
    Laser cutting does not affect the integrity of the AR500 steel.  

    This target has 2-17/32 (.530") round holes that can used as a swinging target with our Swinging Target Stand Kit or can be mounted by the square 17/32( .530") hole using one of our 2 x 4 mounts.

    Learn More
    $60.00

  • Gong Target - 6"

    This 6" diameter target is laser cut out of AR500 steel and has a High Visibility Orange Powder Coat baked on.
    Laser cutting does not affect the integrity of the AR500 steel.  

    This target has 2-17/32 (.530") round holes that can used as a swinging target with our Swinging Target Stand Kit or can be mounted by the square 17/32( .530") hole using one of our 2 x 4 mounts.

    Learn More
    $30.00

  • Gong Target - 8"

    This 8" diameter target is laser cut out of AR500 steel and has a High Visibility Orange Powder Coat baked on.
    Laser cutting does not affect the integrity of the AR500 steel.  

    This target has 2-17/32 (.530") round holes that can used as a swinging target with our Swinging Target Stand Kit or can be mounted by the square 17/32( .530") hole using one of our 2 x 4 mounts.

    Learn More
    $40.00

  • Gong Targets - Complete Set

    Complete Set of Four (4) Gong Targets - Save almost $30.00 by purchasing the complete set!

    This set includes:
    1 - 12" Gong Target
    1 - 10" Gong Target
    1 - 8" Gong Target
    1 - 6" Gong Target

    Each of these targets are laser cut out of AR500 steel and has a High Visibility Orange Powder Coat baked on.  
    Laser cutting does not affect the integrity of the AR500 steel.  

    These targets have 2-17/32 (.530") round holes that can used as a swinging target with our Swinging Target Stand kit or can be mounted by the square 17/32( .530") hole using one of our 2 x 4 mounts.

    Learn More
    $140.00

  • Silhouette Target - 2/3 Size

    This 2/3 size silhouette measures 12" x 20" and has 3 holes cut for maximum mounting options.  The perfect combination with our optional 2 x 4 Silhouette holders.
    Our silhouettes are professionally engineered and manufactured for optimum performance.

    Many other silhouette targets will fall out of their holders after a short time of shooting but our silhouettes have a tab cut on the bottom to prevent it from sliding out of our holder for hours of non-stop shooting.  The 17/32" outside round holes cut into the shoulder can be used with our swinging target holder kit.  Using the square center hole mounts perfectly with our 2 x 4  Target holders.

    Learn More
    $80.00

  • Silhouette Target - Full Size

    This Full Size silhouette measures 30" x 18" and has 3 holes cut for maximum mounting options. It is a perfect combination with our optional 2 x 4 Silhouette holders.
    Our silhouettes are professionally engineered and manufactured for optimum performance.

    Many other silhouette targets will fall out of their holders after a short time of shooting but our silhouettes have a tab cut on the bottom to prevent it from sliding out of our holder for hours of non-stop shooting.  The 17/32" outside round holes cut into the shoulder can be used with our swinging target holder kit.  Using the square center hole, the target mounts perfectly with our 2 x 4 Silhouette Target holders.

    Learn More
    $180.00

Items 1 to 10 of 16 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2