Tennessee Walker Horse Weathervane
Bring grace and charm to your outdoor space with this Tennessee Walker weathervane – Made of 14-gauge steel, this weathervane adds a touch of beauty in any home or garden setting. Design is approximately: 10 1/2" x 8 3/4”. Easily installs in less than 1 minute. Intricate laser cut design with 3 protective coatings baked on to prevent rust or fading for years. Complete set includes laser cut top, windcups that have sealed ball bearings to gently turn in any breeze, an EWNS directional that tells the direction the wind is coming from and your choice of mount.
Complete Weathervane
Includes: Design Top, Windcups, EWNS Directional, and choice of one mount.
Don’t forget to also check out our additional tops that can be interchanged for different seasons or any other occasion. TAKE A LOOK!
REVIEWS
MOUNT TYPES
Garden Mount
60" tall garden mount includes additional 30" stabilizing ground stake for easy mounting. The garden mount ships in two pieces and must be screwed together upon arrival.
Roof Mount
Designed to fit a standard 4-12 roof pitch, but is adjustable to fit most roofs and includes a 15" rod.
Post Mount
Designed to mount to the side of a fence post or any vertical board. The plate measures 3"x3" and includes a 15" rod.
Deck Mount
Designed to fit on top of any flat or horizontal surface. The plate measures 3" x 3" and includes a 15" rod.
Four Sided
Designed to fit gazebos, Cupolas, or any 4 or 8 sided roof/structure and includes a 15" rod.
ASSEMBLY INSTRUCTIONS
- If optional 5/16" x 3 ft. rod is included, drive the silver rod half way into the ground. Place the 60" garden mount over top of the rod. If the silver rod is not included simply push the 60" garden mount into the ground to desired height. (minimum of 12" into the ground)
- Place the directional over the pole (approx. 6" from the tip). Point the N to the north and tighten the screw that is located between the N and E.
- Slide the windcups onto the pole with the ball bearing side down.
- Place the design top onto the pole.
Note
When installing on a roof, deck, post or cupola mount, install your mount to your mounting surface. Place the short rod into the tubing of the mount. Tighten the set screw provided on the mount. Slide the directional (NSEW) over the tip of the rod. Set N to North and tighten the set screw. Place the windcups over the tip of the rod ( bearing side facing DOWN). Then slide the top on your weathervane.
MAINTENANCE INSTRUCTIONS
We recommend that you place a few drops of light oil on the top of the pole periodically to ensure that the design top will turn freely.
If using a roof style mount, we recommend that you ground your weathervane in case of a lightning strike. Please consult your township for local building codes.
This product has been clear coated for additional beauty and durability.
Pairs well with
Tennessee Walker Horse Weathervane
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
-
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
-
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
FAQs
Please read our FAQs page to find out more.
What are your weathervanes made from?
Our weathervanes are made from 14ga CRS steel. We then use 3 protective coatings to prevent rust and fading which means they are built to last.
What's included with a weathervane purchase?
Each weathervane includes your choice of top, a windcup, a directional, and your choice of mount. We do not provide mounting hardware. Your purchase also comes with a limited lifetime warranty.
Are weathervane tops interchangeable?
Yes! For instance, purchase our complete birdhouse weathervane then purchase the additional flag top to interchange for Memorial Day or the 4th of July.
What size are your weathervane tops?
Each top design is approximately 21" long (length of the arrow) with the average height being 8" tall. Each dimension is listed under the description of the product.
Do you make custom designs?
We recommend that you place a few drops of light oil on the top of the pole periodically to ensure that the design top will turn freely.
If using a roof style mount, we recommend that you ground your weathervane.